Picture
TL Safety Ltd are ISOQAR associate network Diamond Members which means we can offer discounts on any ISOQAR training courses booked through TL Safety.

TL Safety prepare management systems to meet many ISO and BS standards such as ISO 9001, ISO 14001, ISO 27001, BS OHSAS 18001, BS 1090 and CE Marking for fabricated structural steel and components.

We can also assist with many National Highway Sector Schemes (NHSS).

TL Safety work with several UKAS certification bodies and can assist you to gain ISO and BS certification offering support and guidance along the way.

If you already have a certified management system TL Safety can carry out your internal audits on your behalf.

We can even assist you to try and make savings on your surveillance fees with your existing certification body. Moving over to an alternative UKAS accredited certifying body is easier than you think and we can obtain a free, no obligation quotation for you.


Contact TL Safety on 07749 838367 or 01204 227002 to discuss many of the services we can provide.

Don't delay, contact TL Safety today.


www.tlsafety.co.uk






















 
 
Picture
TL Safety have been appointed by Conamar Building Services to assist with construction safety for a new £12 Million pound development of a distribution centre and offices for MBDA missiles on the Cutacre site in Bolton. The construction project started in January 2015 and is expected to last for 46 weeks whilst the shell and core is constructed. The interior fit out is likely to last for a further 12 weeks. TL Safety will provide construction safety support to the construction team and will have a presence on site advising on the site set up, reviewing the risk assessments and method statements of the various contractors involved in the build. TL Safety will carry out the site inspections and site audits and generally assist Conamar to deliver this prestigious contract safety.


 
 
Picture
The new Construction (Design and Management) Regulations 2015 (CDM Regs) come into force on 6 April 2015 and apply to all building and construction projects, regardless of the size, duration and nature of the work. Contact TL Safety Limited on 07749 838367 or 01204 227002 to assist with updating your procedures and for construction advice and support. TL Safety are CHAS and SMAS accredited CDMc's and Health and Safety Consultants and can be found at tlsafety.co.uk

The main changes, outlined in general by the Health & Safety Executive, are as follows:

  • Principal designer. The replacement of CDM co-ordinator (under CDM 2007) by principal designer. This means that the responsibility for  coordination of the pre-construction phase – which is crucial to the management of any successful construction project – will rest with an existing member of the design team. 
  • Client. The new Regulations recognise the influence and importance of the client as the head of the supply chain and as the party best placed to set standards throughout a project 
  • Competence. By splitting ‘competence’ into its component parts of skills, knowledge, training and experience, and  - if they are an organisation - organisational capability, provides clarity for the industry to assess and demonstrate that construction project teams have the right attributes to deliver a healthy and safe project. 
  • The technical standards set out in Part 4 remain essentially unchanged from CDM 2007 and HSE’s targeting and enforcement policy, as a proportionate and modern regulator, also remains unchanged.
The Regulatory package The new proposed Regulations and supporting guidance are all in draft form before they come into force and may be subject to changes. They offer duty holders the opportunity to familiarise themselves with the main requirements before they come into force and consist of:

 
Industry guidance has been produced for the five dutyholders under CDM and one for workers, that set out, in practical terms, what actions are required of them to deliver a safe and healthy construction project. These have been written by the Construction Industry Advisory Committee (CONIAC) with small businesses in mind.

 
The draft six documents are available for download below:

  • Industry guidance for Clients
  • Industry guidance for Principal Designers
  • Industry guidance for Designers
  • Industry guidance for Principal Contractors
  • Industry guidance for Contractors
  • Industry guidance for Workers
How does this affect construction companies? Construction companies will have to comply with the revised CDM Regs from Monday 6 April 2015.

Employers will need to provide information, instruction, training and supervision, with workers having their training needs assessed against the needs of the job and employers to meet the gap in skills and knowledge through appropriate training.

Written construction phase plans will be required for all construction projects (including domestic client work) and a principal designer and principal contractor appointed when there is more than one contractor on a project.

The full responsibilities of each key duty-holder, as defined by the regulations, are explained in the Industry Guidance documents.

What does it mean for domestic clients – homeowners? For the first time, the new CDM Regs will apply to domestic client projects, although client duties will normally be transferred to the contractor or principal contractor, or if the client wishes to make a specific appointment, the designer.

All building and renovation work shown in property development programmes will be covered by the revised CDM Regs.

Main Transitional Arrangements

When CDM 2015 comes into force on 6 April 2015, there will be a transitional period that will run for six months from 6 April 2015 to 6 October 2015.

For projects starting before 6 April 2015, where the construction phase has not yet started and the client has not yet appointed a CDM co-ordinator, the client must appoint a principal designer as soon as it is practicable.




CDM Regulations 2015 (Draft L153)
File Size: 621 kb
File Type: pdf
Download File

CDM 2015 for Clients
File Size: 447 kb
File Type: pdf
Download File

CDM 2015 for Principal Designers
File Size: 867 kb
File Type: pdf
Download File

CDM 2015 for Designers
File Size: 735 kb
File Type: pdf
Download File

CDM 2015 for Principal Contractors
File Size: 734 kb
File Type: pdf
Download File

CDM 2015 for Contractors
File Size: 600 kb
File Type: pdf
Download File

CDM 2015 for Workers
File Size: 153 kb
File Type: pdf
Download File

 
 
Picture
Listen to TL Safety's radio advert on Bolton FM from the 24th November 2014 to the 23rd December 2014 and catch our special offer "Breakfast for Two" at Curley's Dining Rooms, Bolton (Curley's Fisheries). Offer available from the 24th November 2014 to the 9th January 2015.
Terms and Conditions Apply.


Listen Live Here

 

 
 
Picture
TL Safety are pleased to welcome Intelligent Comfort Group as one of our retained clients. We were recently appointed as their health and safety advisors. 
Intelligent Comfort Group Limited are specialist providers of Daikin and Panasonic air conditioning products, with over 50 years experience in providing specialist advice, design assistance and superb pre and post sales technical support from the industry’s very best product specialists. Since their conception the company has seen dramatic growth achieved through total commitment and a passion for offering the best possible service to their diverse client base. Their company philosophy is one of total commitment to customer care. By offering total commitment to helping their clients’ needs, they have grown, allowing for greater investment in staff, training and technology


 
 
Picture
TL Safety are pleased to welcome Marsh Environmental (Products & Services) Ltd as one of our retained clients. We were recently appointed as their health and safety advisors

Marsh Environmental has become one of the most trusted and respected names in the cooling and air conditioning industry. They have an incredible wealth of experience and expertise in their field and offer an extensive range of high quality air conditioning products, services and solutions for a wide range of applications throughout the UK. Their products and services can be found at 
http://www.marsh-eps.co.uk/index.html


 
 
Due to continued requests from our Clients TL Safety are now able to facilitate an Employment Law/HR service to compliment our online health and safety services.

FIRST FOR EMPLOYMENT

Your business needs staff, but not the headache that comes with employing them. The Employee Management Package that we can offer will ease the burden of HR management and give you peace of mind when it comes to employment disputes.


The key features of the Employee Management Package are:

  • Access to a cloud based staff management system.
  • Advice and support from qualified employment law consultants.
  • Insurance against employment tribunal and other unexpected business costs.
  • Up to date and comprehensive employment contracts.
  • Up to date staff and management handbooks.
  • Efficient and compliant disciplinary, absence and performance management.
Prices start from as little as £500+Vat per annum. The cost will depend on the number of employees that you have.
Contact us on 01204 227002 for your free "no obligation" 






 
 
Picture
TL Safety provide consultancy services for BS 1090 and CE Marking of fabricated structural steel work. We can prepare your factory production control (FPC) and quality management system to meet the requirements for CE Marking which became mandatory on the 1st July 2014. TL Safety are currently working with structural steelwork fabricators to meet CE Marking compliance. TL Safety are based in the North West but operate throughout the whole of the UK

We will recommend and advise on notifiable bodies who can certify your system and provide a full audit of your system to ensure you are ready for certification.




TL Safety have now extended our services to include Responsible Welding Coordinator training courses for up to Execution Class 2. Through our partnering welding consultancy organisation we can now provide a Responsible Welding Coordinator on a retained basis, welding consultancy and weld testing services. This means that we can now coordinate the whole CE Marking project from start to finish. Further details can be found on our website at http://www.tlsafety.co.uk/ce-marking-and-bs-1090.html
Contact our Managing Director Tony Lundy now on 07749 838367 or 01204 227002 and let us assist you with your CE Marking.

 
 
TL Safety can assist your organisation to gain BS EN 1090 (CE Marking)
CE Marking will be a legal requirement for many organisations an importer, distributor, manufacturer or fabricator of steel products who changes the original properties of a structural component. Changing the original properties includes but is not limited to:-
 

  • shot-blasting
  • painting,
  • cutting
  • cold forming
  • drilling
  • flame cutting
  • bending
  • rolling
  • marking
  • welding
See how TL Safety can help you gain certification for CE Marking.


gain_bs_1090_ce_marking.pdf
File Size: 68 kb
File Type: pdf
Download File